Moving Granite Slabs Made Unbelievably Easy!

Moving Granite Slabs Made Unbelievably Easy!Granite is a common piece in home interiors. This stone material is usually used as kitchen or bathroom countertops breakfast nook, and even in walls. It is available in a wide variety of designs that you can mix and match with your home furnishings and design.

Once granite is installed, it offers a durable surface that resists burns, scratches and other physical damage. But contrary to its tough quality, granite is surprisingly prone to cracking while in transit. Proper handling is important to avoid damaging this pricey igneous rock.

Many granite retailers provide transportation services. Usually, you will just have to wait for the granite to be delivered right at your doorstep. The stone is normally placed in wooden A-frame with pallet collars beneath, check out how pallet collars look like here:

But if, by any chance, your retailer doesn’t provide hauling service, it’s very important to be very careful to avoid breaking your costly investment. You might also need to DIY granite move when doing your home renovations.

If you need to DIY transport your granite, here are steps you can follow:

  1. Granite is transported as slabs. You can have it cut into the desired shape and size at the retail shop.
  2. Create an A-frame using wooden slabs.
  3. Ask the help of a partner or two when carrying the granite.
  4. Hold the slab vertically, one person at both ends of the granite.
  5. Grab the granite firmly with one hand at the bottom and the other on top to stabilize it.
  6. Ask another person to hold the middle of the granite for added stability.
  7. Make sure that there is proper coordination and distribution of weight. Balance is important here.
  8. Slowly lay down the granite slab vertically against the A-frame. Place a collar pallet, much like the one here at, underneath the A-frame.
  9. The unpolished edge should be placed down and the underside against the frame.
  10. Use ratchet tie-down straps placed across the surface to secure the slab.
  11. If transporting more than one slab, place a layer or two of thick cloth or bubble wrap in between the slabs.
  12. Carefully carry the granite to your work area, the same way you did when you transported it.

Other important things:

  • As the name suggests, the A-frame is a wooden platform that uses two beams connected to form a 10-degree angle and joined by vertical and horizontal supports. The sides of this frame serve as surfaces for straps and clamps to attach onto.
  • Do not cut hole in your granite slab as it increases the risk of cracks during the transport. Better do the cutting once at the site.
  • If you have no time to make your own A-frame, there are some retailers that offer A-frames for rent.
  • Granite slabs must be transported vertically. Without solid support structure beneath the granite, the weight is unevenly distributed increasing the possibility of breakage or cracks.
  • Never load granite stone horizontally on your vehicle, even a small bump during the transport can damage your solid-rock investment.
  • Always lift the granite when moving it around. Pushing it through the ground can place it at risk of damage.