Benefits of Natural Stone

Benefits of Natural Stone

There are many benefits of natural stone over other materials like wood or synthetics when you’re doing construction work, or just upgrading parts of your house, like with the addition of granite tiles to a floor. One of the best benefits of stone over wood and other porous materials is that stone of every type does not hold onto infectious bacteria as well as those materials do. That doesn’t mean you don’t need to clean stone surfaces regularly, but they tend to be more sterile than other surfaces, at least if they aren’t allowed to remain wet. That’s not good for any material.

One of the best parts about stone is that it doesn’t burn. Now, ok, some kinds of rocks do burn, but we’re not talking about putting sulfur countertops inside your house. Most stones are very resistant to fire damage, including practically every stone that people use for construction today. This isn’t going to save the flammable elements of your home, but if there ever is a fire, the stone fixtures in your house will be as good as new with a bit of cleaning. Seriously, we don’t want your house to burn down – this is kind of a worst case scenario thing – but it’s still a situation where stone performs well.

There are numerous other benefits to using natural stone in your home as well. Perhaps the most obvious of all benefits is the fact stone is so pleasing to the eyes. Natural stone fixtures are fascinating, whether we’re talking about stone tiles on your kitchen or bathroom floor, or stone steps outside your home, or even countertops. Different types of stone will give you unique looks, just like different types of wood will do this same thing. If you know you want to use stone somewhere in your home but you’re not sure where, then just check dozens and samples for something that looks just right.

Natural stone is also, well, natural. You don’t create toxic waste by using stone fixtures in your home, and stone elements can be lifted out of one setting and placed into another without creating new fixtures, which is far different from if we were talking about wood. Most softer woods wear down after a decade or two, and the fact is that the majority of construction today doesn’t use harder woods like ebony because they simply cost too much per square foot. Some types of stone can actually cost less than some types of wood. If you don’t believe it, then just shop around and see for yourself.

Speaking of different looks, stone gives you a much wider variety of visuals than wood does. That’s because natural stone is more varied than wood in terms of the ingredients which make up the stone and the different processes which are available to finish that cut of stone. If you can imagine a look in your mind, the odds are good that you can find a type of stone which provides that look. Stone comes in many different colors and textures, so even if you’re looking for something rougher like some slabs for your driveway or other outdoor areas, you can find what you want.

Thanks to its increased density, stone also holds up better than most types of wood against moisture, humidity and heat. You will almost always get less warping from a slab of rock than you will from a slab of wood, and this is another great benefit of all types of stone. Even if we’re talking about stone that has been walked on and pitted for decades, you can still just file off a tiny layer and polish that to get something that looks new – this is impossible with wood.

Because stone ages so much better than wood and other materials, that initial investment keeps giving you returns even decades later, when you need to patch it up again. On top of all that, stone just looks good. Whether we’re talking about constructing pillars or window wells, solid rock can give the face of your home a dignified look, especially if there are no other homes nearby using stone. Stone can also be etched and processed in specific ways to create visual effects which would never be possible with wood, like the fluting and milled grooves which can be cut into stone without ruining it.

Not only does stone hold onto thermal energy better than most wood types (again, density), it also has the potential to cut your heating bills thanks to that quality. Different types of stone will do a better or worse job at this specific purpose, and you’ll have to look up what works best for you given your geographical region. As a general rule though, stone fixtures which are denser will hold onto more thermal energy over time.

This next point probably won’t be as widely applicable as the others, but another great benefit of natural stone is the fact it doesn’t require any chemical additives, preservatives, sealants or other washes to make it viable for use in construction. Wood needs to be primed, painted and finished, and while that’s not so bad these days since lead paint is illegal pretty much everywhere, the fact remains that more chemicals go into making wood workable than go into making stone workable. You might be surprised at just what kind of caustic stuff goes into wood treatment and finishing, but it’s worth a look.

Now that you know almost 10 great benefits to using natural stone, maybe you’ve noticed that we’ve missed something on our list here. Whether you have some knowledge we haven’t shared or you just want to comment on what you’ve seen here, feel free to drop us a line and let us know what you think. We create this content for you, so it’s always a good thing to hear back from our readers concerning the things that we write. In any case, tell your friends if you liked what you saw, as there will be much more.