Benefits of Natural Stone

Benefits of Natural Stone

There are many benefits of natural stone over other materials like wood or synthetics when you’re doing construction work, or just upgrading parts of your house, like with the addition of granite tiles to a floor. One of the best benefits of stone over wood and other porous materials is that stone of every type does not hold onto infectious bacteria as well as those materials do. That doesn’t mean you don’t need to clean stone surfaces regularly, but they tend to be more sterile than other surfaces, at least if they aren’t allowed to remain wet. That’s not good for any material.

One of the best parts about stone is that it doesn’t burn. Now, ok, some kinds of rocks do burn, but we’re not talking about putting sulfur countertops inside your house. Most stones are very resistant to fire damage, including practically every stone that people use for construction today. This isn’t going to save the flammable elements of your home, but if there ever is a fire, the stone fixtures in your house will be as good as new with a bit of cleaning. Seriously, we don’t want your house to burn down – this is kind of a worst case scenario thing – but it’s still a situation where stone performs well.

There are numerous other benefits to using natural stone in your home as well. Perhaps the most obvious of all benefits is the fact stone is so pleasing to the eyes. Natural stone fixtures are fascinating, whether we’re talking about stone tiles on your kitchen or bathroom floor, or stone steps outside your home, or even countertops. Different types of stone will give you unique looks, just like different types of wood will do this same thing. If you know you want to use stone somewhere in your home but you’re not sure where, then just check dozens and samples for something that looks just right.

Natural stone is also, well, natural. You don’t create toxic waste by using stone fixtures in your home, and stone elements can be lifted out of one setting and placed into another without creating new fixtures, which is far different from if we were talking about wood. Most softer woods wear down after a decade or two, and the fact is that the majority of construction today doesn’t use harder woods like ebony because they simply cost too much per square foot. Some types of stone can actually cost less than some types of wood. If you don’t believe it, then just shop around and see for yourself.

Speaking of different looks, stone gives you a much wider variety of visuals than wood does. That’s because natural stone is more varied than wood in terms of the ingredients which make up the stone and the different processes which are available to finish that cut of stone. If you can imagine a look in your mind, the odds are good that you can find a type of stone which provides that look. Stone comes in many different colors and textures, so even if you’re looking for something rougher like some slabs for your driveway or other outdoor areas, you can find what you want.

Thanks to its increased density, stone also holds up better than most types of wood against moisture, humidity and heat. You will almost always get less warping from a slab of rock than you will from a slab of wood, and this is another great benefit of all types of stone. Even if we’re talking about stone that has been walked on and pitted for decades, you can still just file off a tiny layer and polish that to get something that looks new – this is impossible with wood.

Continue reading “Benefits of Natural Stone” »

Different Types of Stone and Their Popular Uses

Different Types of Stone and Their Popular Uses

That might seem like a long-winded title, but we have some very simple information to share today that should appeal to all lovers of stone. There are many different types of stone, and their popular uses may surprise you. Denser, “harder” types make great walking surfaces, like the floor tiles in a kitchen or bathroom. Softer, less dense types of stone can be great for use in cooking, like when they are made into baking sheets and pans. These are just a couple of quick and easy examples, but there are probably more uses for stone than you realize.


Granite is pretty much the go-to stone for kitchens across the globe. That’s because of the high versatility in the stone. It’s very dense compared to other types of rock, and because of that impressive density, it is also far less porous than most types of rock, which in turn means it holds onto bacteria to a lesser degree than things like wood, vinyl or linoleum. These are reasons why granite countertops are so popular.


Limestone is much softer than most other types of stone, and it can also be broken down by certain acidic compounds, so you probably won’t find it on floors or counters anywhere. But limestone is a very important ingredient in high quality cement. Even if you don’t see if inside your house, the odds are good you could find it in your foundation if you were to chop off a chunk and run some tests.


Sandstone is more of a mixture of several different ingredients than a solid stone type. Silicates, rock fragments, sand grains and other minerals can settle and become harder thanks to time and pressure. Sandstone is much easier to cut than even limestone, and its poor absorption rate makes it great for use in flooring, especially in environments which are often wet, like bathrooms.


You can find slate in all kinds of appliances, from refrigerators to ovens, stoves and ranges to microwaves. Slate is very dense compared to other types of stone on this list and it has a staying power which allows it to last for years in conditions where other rocks would start to crumble and come apart. Slate has uses outside of the kitchen too; just look it up if you want to find more practical applications.

The only thing we can’t recommend is shipping stone over long distances. Because most types of stone are much denser than wood, they tend to weigh more and therefore cost more to ship. If you have local quarries where you can buy raw stone, that might work out the best for you. You can take your samples to a mason or other stone smith and get them shaped into the fixtures that you want, and it will often cost you less than just buying those fixtures outright and then having them shipped to your home. We realize this isn’t viable for all of our readers, but some of you can save by taking this advice.

Your Ultimate Guide to Finding the Perfect Stone Tile


Using the right stone tile is just as important as choosing the right construction materials for your building. I realized this after spending a week of winter adventure at a local ski resort. Armed with the usual ski stuff and gears like those you’ll see at WinterBadAss, I and a group of ski fanatics trooped the resort. It would have been a stunning architectural piece had they picked the right sandstone or granite for the resort’s flooring.

Natural stone bring texture and color of nature inside our buildings. It adds warmth and quality to a space. It’s not surprising that stone tiles are sought after. But since natural stones are derived from nature, they come in the wildest variations. It’s important to do your homework when choosing the best stone tile for your building.

Here let’s take a look at the six most popular stone tile materials:

  1. Slate

The most commonly used stone tile, slate comes from a metamorphic rocks and can be easily split into thin sheets. The cost of slate depends on the density of the tile – the denser it is the better the quality and less likely to be flake and chip away.

Slate tiles are highly resilient and tend to be dark. However, these tiles require someone skilled for installation so you have to ask for an accurate costing to avoid unnecessary fees. This stone tile costs between $5 and $20 per square foot. Slate is popularly used in living areas, entryways, kitchens, and hallways.

  1. Travertine

Another common stone picked by interior decorators is travertine. They can be easily mistaken as limestone or marble.

Made of calcite sedimentary rock, travertine is closely related to limestone. It is nearly impossible to keep a shine with this stone but once the natural, matte finish has settled, it’s one of a kind. Only few materials can rival the warmth that travertine offers. This would have been the best stone material for the ski resort I’ve visited. It should look good taking pictures with while I wear full ski gears, including the best ski gloves 2017 that I recently bought.

The Trevi Fountain in Rome is a classic example of structure made of pure travertine. It’s been standing strong there for over 300 years now – that says a LOT. The only con with this material us that it has a tendency to stain and scratch.

  1. Marble

Marble has been the top pick even during the time of royalties because of its distinct colors and patterns. It is also popular for its resilience and hard finish. However, marble is prone to scratching and staining, and thus requires extra care. It tends to absorb moisture so be careful when using it outdoors. Price ranges from $5 to $50 per square foot.

  1. Granite

Perhaps the hardest natural stone that you can install in your home, granite can hold a shine better than any of the other stones. It also repels water like no other. However, granite stone has a very hard, unforgiving surface and seems cold. It is best installed in baths, hallways, kitchens and living areas.

  1. Limestone

Another calciferous stone, the limestone is a product of tectonic action and long idle years. The formation of this natural stone makes it a more resilient and better material for use as flooring. It has unique beautiful colors and patterns but has a tendency to look like wood.

  1. Sandstone

Another great flooring material, the sandstone has some wild color variations. It blends easily with other materials so it’s also very prevalent. One problem with sandstone is that it has a limited color options. The cost of sandstone ranges from $10 to $40 per square foot.

Why Was The Renaissance So Ahead of It’s Time?


It is safe to say that without the technology that was developed by famous inventors during the Renaissance period we would not have the technology and lifestyle that we take for granted today. Planes and helicopters? Leonardo da Vinci drew his first chopper LONG before the Wright brothers were even old enough to THINK of the idea of an airplane. Unique forms of warfare? Da Vinci and others dreamt of ways to fight wars with focus mirrors to physically burn invading ships.

One could go on and on, listing example after example of amazing, forward-thinking inventions that the Renaissance thinkers came up with. But what is really important to know is WHY these thinkers came up with the inventions that they did. How were they able to predict and invent technology that they didn’t even have the technological capability to make?

Part of that comes from the philosophy that the Renaissance was built on. In fact, almost everything about the Renaissance comes from the thought processes that dominated that day and age. The Renaissance time was obsessed with the ancient Greeks. They loved the order, the philosophy, and the ancient beauty that went with Greek culture.

The reason that these thinkers could do the amazing things that they did was mostly because of their interpretation of Greek culture. Their interpretation led to the idea of the “Renaissance Man,” a person that had a complete education in all areas possible. This includes areas like music, art, sculpture, science, courtly manners, poetry… Everything. The true Renaissance man was also expected to have a full knowledge of at least 1 or 2 other languages, and the known histories of the great cultures of the past.

With such an amazing background in all sorts of education, it’s hardly a wonder that these great men were able to make inventions that still shock people with their complexity and sheer innovation. When you have knowledge of many different types of education and you have competence in at least a few of these areas, there is little that you cannot do. If that sounds a bit esoteric here is an example:

The creators of the game Bioshock are both great programmers, story writers, and trained in literature. They came up with the idea as an extrapolation upon Ayn Rand’s work “Atlas Shrugged,” wondering what would happen if her ideas were able to proceed unchecked. They would not have been able to create this work if they were not knowledgeable in programming, because they would not have had the skill. But if they hadn’t have been readers and thinkers, they would not have been able to come up with the story.

This is also true of any business you’re in. The dog toys from Dogs Rant have to be created with this sort of care, because people care about their pets and innovation in the pet arena.

So if you’re making flying machines or writing great books on dog training, you could benefit from being a Renaissance man or woman yourself!

Moving Granite Slabs Made Unbelievably Easy!

Moving Granite Slabs Made Unbelievably Easy!Granite is a common piece in home interiors. This stone material is usually used as kitchen or bathroom countertops breakfast nook, and even in walls. It is available in a wide variety of designs that you can mix and match with your home furnishings and design.

Once granite is installed, it offers a durable surface that resists burns, scratches and other physical damage. But contrary to its tough quality, granite is surprisingly prone to cracking while in transit. Proper handling is important to avoid damaging this pricey igneous rock.

Many granite retailers provide transportation services. Usually, you will just have to wait for the granite to be delivered right at your doorstep. The stone is normally placed in wooden A-frame with pallet collars beneath, check out how pallet collars look like here:

But if, by any chance, your retailer doesn’t provide hauling service, it’s very important to be very careful to avoid breaking your costly investment. You might also need to DIY granite move when doing your home renovations.

If you need to DIY transport your granite, here are steps you can follow:

  1. Granite is transported as slabs. You can have it cut into the desired shape and size at the retail shop.
  2. Create an A-frame using wooden slabs.
  3. Ask the help of a partner or two when carrying the granite.
  4. Hold the slab vertically, one person at both ends of the granite.
  5. Grab the granite firmly with one hand at the bottom and the other on top to stabilize it.
  6. Ask another person to hold the middle of the granite for added stability.
  7. Make sure that there is proper coordination and distribution of weight. Balance is important here.
  8. Slowly lay down the granite slab vertically against the A-frame. Place a collar pallet, much like the one here at, underneath the A-frame.
  9. The unpolished edge should be placed down and the underside against the frame.
  10. Use ratchet tie-down straps placed across the surface to secure the slab.
  11. If transporting more than one slab, place a layer or two of thick cloth or bubble wrap in between the slabs.
  12. Carefully carry the granite to your work area, the same way you did when you transported it.

Other important things:

  • As the name suggests, the A-frame is a wooden platform that uses two beams connected to form a 10-degree angle and joined by vertical and horizontal supports. The sides of this frame serve as surfaces for straps and clamps to attach onto.
  • Do not cut hole in your granite slab as it increases the risk of cracks during the transport. Better do the cutting once at the site.
  • If you have no time to make your own A-frame, there are some retailers that offer A-frames for rent.
  • Granite slabs must be transported vertically. Without solid support structure beneath the granite, the weight is unevenly distributed increasing the possibility of breakage or cracks.
  • Never load granite stone horizontally on your vehicle, even a small bump during the transport can damage your solid-rock investment.
  • Always lift the granite when moving it around. Pushing it through the ground can place it at risk of damage.

What are the Best Alternatives To Stone Flooring For Your Gym? Read This

What are the Best Alternatives To Stone Flooring For Your Gym? Read This

Stone flooring is great but not for home gym.

The solid characteristic of stone floors makes it the least likely material for use on gym flooring. Aside from being very uncomfortable, working out on a hard surface for prolonged periods can lead to a multitude of injuries, particularly of the joints and muscles.

Imagine practicing your routines on a wooden dummy, like those you can see here at, but over a hard surface. You can just think of the amount of stress and pressure that your lower extremities can sustain with every major strike you make. Not to mention, the possibility of a fatal head injury should you accidentally trip.

Because of this, choosing the best type of flooring is a critical element in making your home gym. There are just so many available options in the market that is available to you. But before we go these floor types, let’s first take a look at these two crucial elements – purpose and location.

When choosing the type of flooring, you will need to know what type of activities will be performed on the floor. If you are to use the place for mixed martial arts, it’s best to make the flooring more solid but add up thicker cushioning layers. There are a lot of floor cushions that would look best with your mixed martial arts combat suits, like those here at . If the gym is solely for regular weight lifting, wood flooring may do.

It is also important to consider the location of the gym. For instance, if it’s located in the garage and you prefer carpet flooring, you may have to install a good sub-flooring or insulation. Good ventilation is necessary for home gyms, not just for the flooring, but for the convenience of the entire place.

Gym flooring options – wood, laminate, cork, carpet?

  1. Wood

Wood is a time-tested flooring material which is known for its longevity. We normally see wooden flooring on basketball courts, sport halls or large gymnasiums. It is also great for home gyms, provided that the floor is not prone to moisture. Also be sure to use high quality wood.

  1. Laminate

A cheaper alternative to wood flooring, laminate is easy to maintain. This floor type can be quite slippery and may work best for yoga studio. It is also not advisable for areas that are at risk for moisture. When using laminate for flooring, be sure to have proper ventilation. Unlike wood, laminate is easily damaged and scratched especially with heavy traffic.

  1. Cork


A good flooring option for your home gym, cork is an all-natural, renewable, eco-friendly, and biodegradable material. It also has very efficient insulating properties. It has an appealing look, soft texture, and is non-slippery. However, the cork is prone to tears especially when gym equipment is dragged across the floor. If you opt for this material, make sure that the location is not prone to moisture.

  1. Rubber

Rubber flooring is resistant to many kinds of contamination and is easy to clean and maintain. Unlike the other materials mentioned above, this one doesn’t absorb water and is not slippery. It is an excellent flooring option for your own gym. On the downside, this material can be quite pricey.

  1. Carpet floor tiles

Many of these floor materials are very durable and can last for several years. It is made of specialized materials that allow it to be stain resistant. The best thing about carpet floor tiles is that they are very cost-effective and can also be easily replaced.

These are the five options you have for your home gym flooring. Stone and paved floors are a no-no!

Stone Musical Instruments? They Could Be The First Musical Instruments

We’ve talked about all the great uses of stones – from construction to industrial to energy generation. But have you ever thought about stones being used to create music?

It may sound weird, even unbelievable, but stones could well have been the earliest musical instruments man has ever used.

Long before man has invented brass musical instruments like the saxophones here at, our pre-historic ancestors have actually played music by striking on rocks. Stones were certainly not the ideal material for musical instruments. Compared to the tone produced by wood, the versatility and durability of metal, stones seem impractical. But the different special qualities of stones actually allowed man to turn it into musical instruments.

Archaeologists have discovered ringing rocks on different sites across the planet, usually close to rock paintings. In Africa, rock gongs have been found in different parts of Uganda, Nigeria, and Sudan. Meanwhile, in India, stones are continued to be used by certain minorities as substitute to drums.

Some of the earliest known tuned percussions have been found in Vietnam and China. Archaeologists have discovered sets of stones in Vietnam, in which each stone plays a different pitch. These tuned stones date back to over three thousand years, and some are even used in ceremonies. The use of stones for music continues in this Southeast Asian country. Some musicians use modern tuned lithophones, which are actually xylophones made of stone.

Similar tuned stones have also been unearthed in other parts of the world. In Central Africa, specifically in Togo, small flat stones producing different tunes are laid on the ground and struck to produce music. These are used in ritual performances that signal changes in the seasons.

In other parts of Asia, the stone chime bars are still used in ceremonial music. This tradition is believed to have originated in China where an ancient musical instrument called bian q’ing, a lithotope composed of sixteen to thirty two stone bars and suspended on a frame, can be found. The chimes are made of different stone types like marble, jade, and others. These chimes are arranged in L-shape and are played by striking with a hammer. This stone musical instrument is used in other cultures in the Far East such as in Japan, Korea and Vietnam.

The use of stones for music has reached the Western World during the 19th century. It was in 1785 when Peter Crosthwaite invented the very first lithophone, a xylophone-type instrument made of stones. But it was Joseph Richardson who actually popularized the stone musical instrument. Inspired by the work of Crosthwaite, he built a much larger instrument known as the Rock Harmonicon. He, along with his family, toured the world and played his stone musical instrument along with its ensemble of drums, steel bars and bells. They have even performed in front of Queen Victoria herself. Other performers followed suit. Some of the successful names include William Till, who eventually moved to the USA and performed with Till Family Rock Band.

Today, there are still musicians that accept the challenge of playing music on stones. It’s amazing how the stone tunes can actually blend well with other wind musical instruments that can be found at Truly these musical stones attest to the ingenuity of man!

Choosing the Right Stone Materials Is Just A Part of an Effective Soundproofing Project

If you’re someone who loves music, you definitely need to have a music room. If you’re into drums and want to improve your skills, you want to practice all the time. For sure, you love to practice but do you think others want to listen to your music all the time?

Your neighbors don’t care about what brand and model of drum you play, whether it’s among those found at or not, they just want to live in peace in the neighborhood. Give them the favor of peaceful coexistence by having a soundproof music room.

Home soundproofing

Home soundproofing is now becoming popular, especially with home theaters, music room and even regular bedrooms. While soundproofing seems like entailing a major home retrofitting, this project is actually not as complex as it sounds. Here are a few simple but effective tips.

  1. Check soundproof ratings

All materials used for soundproofing are given acoustic rating. Choose materials that are rated for effectiveness: the higher the rating, the better the soundproofing capabilities. If you are using stone for the walls, make sure to read the specs as there are some stones that are more sound absorbent than others. Read about the stone’s acoustic properties and select those that have the best acoustic properties.

  1. Use soundproof windows.

The windows are usually the most common route by which noise travels in and out of a room. Usually, homes are built with single pane windows installed on a wooden frame. Unfortunately, these types of windows have very poor sound deadening capabilities. Double-paned windows are better in terms of noise reduction. Read the acoustic rating of the windows.

  1. Use noise reduction drapes and window plugs.

If changing the existing windows is not possible, you can use sound deadening drapes – normally used in hotels. In addition to these drapes, you can also plug holes around the window frames using soundproofing mats. These two simple remedies allow you to bang on your beginner drum set without disturbing others.

  1. Add insulation and drywall.

Another major source of concern that you should address to reduce noise, the wall can be made more soundproof by adding a layer of insulation and a drywall. The drywall improves sound resistance while the insulation improves the sound absorption. For added soundproofing, you can also install wall coverings.

  1. Use absorbent materials.

You can further absorb sound and dampen sound waves by adding absorbent materials inside every room. Draperies, carpeting, and furniture can all help reduce the sound.

  1. Install solid-core doors.

Use solid-core doors for your music room so that the sound can be contained inside. This thick surface gives an added layer of that can prevent the sound from travelling from room to room.

There you have it – six simple ways you can do to turn your space into a soundproof room. If you’re running on a budget, you can try cheap soundproofing techniques, such as pushing mattresses up against the walls or hanging the bedding or carpeting, to minimize the sound. It won’t completely sound-proof the room but at least you minimized the noise.

Stones For Hunting? Yes, Our Ancestors Can!

Stones For Hunting? Yes, Our Ancestors Can!

Stones have many uses.

They are used as building and decorative elements, aggregates for concrete, components for industrial uses, lime burning, and ingredient for cement.

Most of us are aware of the conventional uses of stones.

A recent discovery proved a somewhat peculiar purpose for which stones were used.

Archeologists have unearthed artifacts that showed how our ancient ancestors used sharpened stones for hunting. That’s long before the human race has utilized modern hunting equipment like bows and arrows, shot guns and air rifles. Just visit Rifle Judge and you’ll be amazed at how far hunting technology have gone through the years.

Hunting during the Stone Age

Pre-historical evidence shows that humans started hunting large animals as early as 500,000 years ago. During this time, humans started to use stone spear tip. The earliest hunting tools that humans used were made of simple wooden sticks with sharpened end which turned them into spears.

Approximately 100,000 years ago, our ancestors learned how to make tools from indigenous materials. Stones, being the most widely available natural resource, were among the very first implements that humans learned to use. Very roughly chipped out or carved stones were attached into long sticks, turning them into more efficient hunting spears.

The sudden spurt in technology allowed the creation of more effective weapons and tools, such as throwing spears, axes and, later, the bow and arrow. From stones humans turned to better materials like ivory, bone, antler, and others.

Peculiar stone hunting tools

Aside from the more commonly used hunting tools, our ancestors also devised some peculiar stone tools for hunting. Spheroids that were discovered in South Africa are now believed to be used as projectile weapons for hunting. Previously, these artifacts were thought to be used as percussive tools for grinding, shaping and carving other materials. But recent studies suggest that their weights were able to produce optimal damage when thrown to their prey, rather than just being used for crafting other tools.

These early hunters were adept at disc throwing. They were able to hit their target with much precision even at a distance. It allowed the Stone Age hunters to hunt larger animals which they were unable to do so using their sticks and spears. But the precision of these spheroids never compared to the accuracy of modern air rifles. Many of which can be coupled with specialized scopes, like those you can find on this site: The spheroids served multiple uses in hunting. Aside from being a weapon, they were also very useful in butchering their games.

The Stone Age produced some of the most ingenious hunting tools that vital to the survival of our species. Truly this period of the human race can take pride in the sudden leap of knowledge. Turning stones into crude instruments is something unthinkable, especially for humans who have roamed the earth for a very long time as scavengers.

As we continue to uncover artifacts and learn about our history, we cannot help but admire how our species have developed tremendously through the years! It’s astonishing how early man has learned to use stone for a wide variety of purposes.

History’s Most Impressive Stone Buildings


Although we do have a bit of a bias, we have history to back us up: stone is humanity’s most reliable building material. When you’re describing how hard something is you don’t say that it’s “hard as a tree;” the term “hard as a rock” exists for a reason! People have made some of the most impressive monuments in history out of stone, and many of these buildings are still standing today! Stone lasts almost forever; the monuments and buildings bellow stand in witness to that:


We’ll get the obvious one out of the way; Stonehenge is one of the most recognizable stone structures in history. No one knows quite how or when Stonehenge was built. This ring of standing stones has been standing for more than a thousand years, and only a few of the massive cornerstones have fallen. The rest have been there, standing silently on Salisbury Plain for longer than some history books record.

The Pyramid of Khufu

If you’ve ever seen the famous picture of the three pyramids in the Egyptian desert, you have seen the pyramid of Khufu. This is the largest pyramid of the three. This pyramid was built as his tomb and gateway into the afterlife. It took a good part of his life to build, and still draws millions of people per year to look at its beauty.

Notre Dame Cathedral

This massive cathedral in Paris, France took almost 600 years to build. Let that sink in for a minute. For comparison, the United States was formed as a nation about 200 years ago; the cathedral took 3 times longer to build! No matter what are your feelings about religion, you can’t help but feel awe when you step inside the massive stone building. Think about how long it took to build; the vision of the builders to construct something they knew they would not live to see is staggering. The cathedral would have been filled with religious songs and beautiful organ sounds, just like the keyboards from

The Parthenon

Another stunning work of construction is the beautiful Parthenon in Greece. Although it was almost completely destroyed during the occupation of the Ottoman Empire during the 1400s, it still stands today as the most impressive part of the Acropolis, or “raised city.” The Parthenon has stood as the temple to the goddess Athena for over a thousand years; it was made of massive slabs of marble that had to be imported to the area. I think you can figure out the pattern here; the buildings that were made for religious reasons often took the most trouble to build, because they were made to painstakingly careful specifications.

Culture and history is largely made out of stone. Although great works of literature and amazing works for piano are a great part of history, some of the most beautiful parts of civilization are made out of stone.

Making a Mancave

Making a Mancave

A mancave should be every guy’s place to go where he can shut out the rest of the world and just chill. That means every great mancave should come equipped with tons of books, a television, a gaming console or computer or both if the owner is into that sort of thing, and more. Perhaps the most important ingredient in every mancave is the design motif which actually makes it look and feel like a cave, rather than just another room in the house. That’s why making a mancave absolutely demands you use natural stone as much as possible to create an environment like a cave.

Now, of course, you’re probably not going to get stone computers or televisions or other fixtures. But the same can’t be said for things like floors, walls, ceilings, windows, lamps, bookshelves, entertainment centers and a horde of other furniture items. And to be totally fair, you probably could get stone computer or television cases if you were willing to pay an obscene amount for the custom craftsmanship and work. But those would be relatively small things compared to walls and a ceiling made from chunks of rock and cement. These can make a mancave actually look like a cave.

Even an environment which is designed specifically to look primitive must have decent lighting though. When it comes to mancaves, you need lighting which can be easily installed and moved around as your needs change, and that makes LED lighting the perfect option. At Light Bar Report, you can read all about different LED bars and lights which you can easily align with a wall or dangle from a ceiling. These can also be moved around to light up different corners of the “cave” if you decide you want to reorganize things at a later date. LEDs are highly versatile and every man can appreciate that.

As for the types of stone to use in your own mancave, well, that’s totally up to your own personal preferences. Maybe you like the solid look and feel of granite, or the way feldspar can deflect light and make it look like your walls are aglow. More than anything, you need to look at how much you’re willing to spend, and what quality of stone you can get at that budget level. Not everyone has thousands of dollars to dump into a mancave, but that doesn’t necessarily mean they can’t make a good one.

This means you need to get accurate measurements for the area you want to upgrade. Be sure to measure the cubic footage from the floor up, first measuring for square footage and then going up the walls to the ceiling accordingly. Because buying materials in bulk is pretty much always cheaper than buying smaller quantities, knowing how much you need before you begin construction can help to cut down on the overall cost of your mancave. Just make sure you’re actually going to use the materials you buy though – it’s just as easy to waste money as save it by buying too much stone.